loading
This is a temporary multipurpose workstation that could be used for many different purposes. 

Step 1: Cut Flaps Off Box.

Step 2: Cut About 2 or 3 Inches Off the Top of the Box.

Step 3: Cut Out a Lid/desk That Fits Well on Top of the Box.

Step 4: Tape on Lid/desk on Both Sides.

Step 5: Make and Tape Dividers.

The dividers can be customized depending on what you will be putting in it.

Step 6: Stock With Supplies.

Step 7: You're Done!

This is not a soldering station. A soldering station is one you can control the temperature. This is merely a box with a few soldering tools.
<p>+1</p>

About This Instructable

1,709views

12favorites

License:

More by BikeHacker:How to Make a 3D Printed Fidget Spinner Using Fusion 360  How to Make a Ring From a Nut in 30 Minutes Blinky Blockhead (beginner Arduino project) 
Add instructable to: