Picture of Gummi Shot Glasses
It's always the same. . .you get drunk, you get hungry. Wouldn't it be great to have a shot glass you could snarf down as soon as it was empty?

Gummi shot glasses are shown here, but the same idea could be applied to chocolate with or without various jams as filling, or other candies (gummi-types are recommended). You can also use this mold/tray to make awesome chocolate cake shots.

Note: If you're underage and feel like getting drunk, don't - if you do, don't blame me.
Also Note: The mold used here is from thinkgeek.com - it's intended for making ice shot glasses which are awesome, but not as tasty as gummies.
And one more note: If your finished shot glasses are a little on the sticky side, try a (very) light dusting of corn starch, and make sure to keep them cool if you can. Both will help cut down on the stick-factor.

Step 1: You'll Need. . .

Picture of You'll Need. . .
  • 16 ounces gummi worms (or bears)
1-40 of 230Next »
Well I've done several more attempts and here are my issues.

1. Glasses are very sticky
2. Glasses melt extremely quickly and turn into a mess/fall apart

I'm not quite sure what I'm doing wrong since you don't seem to have these issues.

My process: Cover mold with confectioners sugar. Melt the gummy bears for about 45 seconds in the microwave. Pour into mold. Freeze for about 2 hours. Remove glasses. I was really looking forward to making these for a few Thanksgiving parties but it's just not working.
shesparticular (author)  nightzero881 year ago
I'm sorry to hear they're not working out well for you, but since I didn't experience these issues I'm not sure what to suggest. I don't think it should matter, but the difference seems to be that I used gummi worms rather than bears (though I have also made them with bears). Hope you're able to find a solution!
Yeah, I just can't understand it. :(

Even 5 minutes after taking them out of the freezer and putting them in the fridge they still melt. I did notice my freezer is set to the warmest setting so maybe they weren't getting cold enough.

I'm still planning on making them and I guess I'll just tell people to eat them quick.
How do you clean up your bowls after you're done? I would suspect melted gummy bears in a garbage disposal would be bad.
shesparticular (author)  nightzero881 year ago
I just allowed the gummy to cool slightly, then peeled off and threw it in the trash.
Peeled what off sorry? I suppose I should have asked before trying as well. I used a mug and have a big pile of gummy there and I'm not sure what to do with it.
shesparticular (author)  nightzero881 year ago
You should be able to peel it off of the mug. Any residue that's left should rinse off with warm water.
Ah, I see. Thanks.

Few more things since you're around. I made one, left it in the freezer for about an an hour and a half. I dusted the inside of the mold with corn starch but it was still hard to get the glass out without crushing it. Additionally the glass was not hard and easy to misshape and finally it was very sticky. What are your recommendations?
shesparticular (author)  nightzero881 year ago
I'm afraid I didn't have too much trouble with sticking or mis-sharpen glasses, but you might try greasing the mold rather than dusting it with powdered sugar if it sticks very badly.
Did you make sure you put them in the freezer for 2 hours? I also used corn starch on the mold instead of sugar. What did you use?
shesparticular (author)  nightzero881 year ago
I had success with powdered sugar, corn starch, and also with oil.

Hope that helps!
It does, thanks so much. Last question I think, did you put corn starch/sugar/oil just on the mold or did you put them around the glasses themselves once you were done?
shesparticular (author)  nightzero881 year ago
I just put it on the mold, but dusting the glasses after unfolding can help cut down on stickiness.
I came up with one more thing to ask. I only have one of the molds currently (guess I need to invest in more!) but I have a 3 pound bag of gummy bears. Because they harden so quickly and because I can only make 4 at a time do you know roughly how many bears are needed to make 1 cup? It sounds like 16 oz makes 4 but that doesn't convert well into grams. Any thoughts? Thanks.
shesparticular (author)  nightzero881 year ago
I'm afraid I'm really not sure - sorry!
soulgraber2 years ago
nice i love it thanks for posting :)
Who's thinking about vat19?
I was...but at 12.99 for 6 glasses + S&H, I'd be broke!

On the other hand, by utiliizing your Instructable, my Fred mold & my gummies, I will create a vastly similar product at less than 1/4 of their cost!
O cool
brat444203 years ago
Has anyone made jello shot filled gummi shots? I ordered more molds from ebay and am going to start making a bunch of cups tonight for a luau this weekend..i was thinking of using pineapple flavored Life Saver gummies and making pina colada jello shots for one flavor, strawberry gummies and lemon drop jello shots, and apple gummies with buttershot jello shots for a twist on a Caramel Apple shot. I may even try making pudding shots in a gummy glass.
mzummallen3 years ago
Effen Vodka. If you don't like Effen Vodka, too Effen bad.
shesparticular (author)  mzummallen3 years ago
Great idea :D I'll try these for Halloween this year, to hold the "worms and dirt" I make. (Also, for parents after trick-or-treating is long over)
shesparticular (author)  garnishrecipes3 years ago
Hope you enjoy them!
rick62133 years ago
Vodka Imported from Holland!
lcuccia3 years ago
I need to make 100 Gummy Bear shot glasses for this saturday, how many bags of gummy bears do i need. My mold makes up to 10 at a time. Please someone let me know soon. Thanks
shesparticular (author)  lcuccia3 years ago
I'm afraid I can't give a figure for your mold, since the one I have makes only 4 at a time and I don't know if yours is different, but each 4 glasses in my mold required 16 oz of gummi worms. So, for 100 glasses that would be 400 oz (in my mold).
11kg of gummi worms? Mind is absolutely blown.
shesparticular (author)  steviesteveo3 years ago
Mine is as well, but for 100 glasses I suppose it doesn't seem so unreasonable.
OrIsIt4 years ago
What can i do to subsitite the mold? I was think of take diffrent plastic of paper cup and taping the for a mold? will this work? And will i melt from drinking tea with it
shesparticular (author)  OrIsIt4 years ago
I'm kind of a big fan of this mold since I've also been able to use it for baking, but if you don't have one or don't want to purchase one, I'd suggest one of the following:
  1. Filling a large container with corn starch and inverting a shot glass into it in several places (open side down). Then fill these spaces with the melted gummies.
  2. As you mentioned, placing a small plastic cup (lightly oiled) inside of a larger cup and taping the two together along the rim.
I'm not sure how tea would work since I haven't tried hot beverages. At least made with this mold though they're rather thick so I don't think it would be a huge problem.

Please let me know how it goes!
ppham4 years ago
hmm I tried making these recently. Finally got a batch that wasnt too sticky on finish but they seem to deform pretty quickly (5 minutes or so) if they're left in room temperature. Is this normal? would coating them in powdered sugar or corn starch make them more resistant to deforming in room temp? Or perhaps i should add corn starch to thicken it during the melting stage? any help would be appreciated.
shesparticular (author)  ppham4 years ago
I'm afraid I haven't had a problem with them changing shape at room temperature, and to be honest I'm not sure if adding corn starch to the gummi mixture would help or not. It could affect the taste some, and corn starch thickens when heated (to boiling is ideal). You might try just cooking the gummi mixture a couple of seconds past melting and see if that helps. Please let me know how it goes and good luck!
Hey, is it possible if you could list the brand and ingredients of the gummi bears on the packaging you used? The difference in ingredients between different brands of gummi bear may be why there are differences in results. I'll give the extra seconds of cooking a shot and see how it goes.
Thanks for all your help!
shesparticular (author)  ppham4 years ago
They were Walgreen's brand, but I've also used Black Forest brand gummi worms. Both list the following:

Ingredients - Corn Syrup, Sucrose, Gelatin, Citric Acid, Apple Juice Concentrate, Sodium Citrate, Natural and Artificial Flavor, Coconut Oil, Carnauba Wax, Ascorbic Acid (Vitamin C), Red 40, Yellow 5, Blue 1

Hope that helps!
mrsmonkey4 years ago
Ok so I tried this yesterday and unforunately it didn't come out like yours was pictured. Here's what I did. I split up the gummy bears by colors and while I was doing that I had boiled water using my double boiler because I don't have a microwave. As each color was melting I had dusted the mold lightly with corn starch to prevent from sticking to the mold. After I had placed all the melted gummy bears in the mold I had placed them in the freezer. I went back to the freezer about 2 hours later and tried to pull them out so I can make more and it would not pry off the mold for anything. By the time I got the gummy off the mold it no longer looked like a shot glass or held itself up. Any ideas as to what went wrong or what I can do to make it work? I need about 40 of them by Sunday night, so I really need to start them asap!! PLEASE HELP!
I was also thinking to maybe spray the mold with pam before pouring in the gummy bears, but idk... PLEASE HELP!!
shesparticular (author)  mrsmonkey4 years ago
I'm afraid I'm really not sure what the issue might have been since I haven't had this problem. I'd suggest trying some cooking spray on the mold and seeing if that helps. Also, did you melt the gummies fully (so that they were liquid, not just softened)?

Just as a note, I had to totally invert the mold (as pictured in the picture in step 3) in order to unmold them (they don't just slip out). If you pull on them as gently as possible with the mold inverted you should be able to get them unmolded without any major issues.
I melted them down completly to a point where it was a liquid ( although they get really gummy and sticky very quickly )
I inverted mine also, the outside of the shot glass was perfectly fine, the only issue I had was the inside of the mold itself ( like where the alcohol would go normally ).
I will try this again tonight with cooking spray. I really hope this works. I was soooo excited about this...
Also, any other ideas as far as what I can melt and put into the mold to use?
shesparticular (author)  mrsmonkey4 years ago
Also, just as a note, after inverting the mold, it works best if you push the center portion of the mold inwards instead of trying to pull the gummi off of it - hopefully that'll help!
1-40 of 230Next »