Step 1: Materials
- a pair of lace-ups
- some elastic (doesn't have to be as wide as in the picture, but how can you not love that!) I used less than 1/2 yd, but if you use thin elastic, you might want to use more than one strip
- a needle
- some heavy-duty button thread
Step 2: Measure Elastic
I pinned the instep side of the elastic first (see first picture), then stretched the length of it over my foot and pinned the top part.
See image notes for clarification.
Then I marked that elastic and cut another one to mirror it for the other foot.
Step 3: Sew Instep
Using a small backstitch, sew through the elastic to the inside of the shoe across the full width of the elastic.
Then tack down the corner of the elastic that sticks out when you fold the rest over the shoe (this is easier to understand when you do it in person).
Picture 1 shows starting the stitching on the outside of the shoe.
Picture 2 shows the needle going through to the inside of the shoe.
Picture 3 shows the outside of the shoe after being sewn.
Picture 4 shows the inside stitches.
Picture 5 shows taking down the corner.