Instructables

Electric Cigar Box Guitar

Featured

Step 12: Glue

Picture of Glue
13B.jpg
13C.jpg
Epoxy your 1x2 to the inside-top part of the cigar box.

Make sure that the end of the 1x2 with the three small holes is sticking out about half an inch from the cigar box on the side with the potentiometer hole.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!