Instructables

Electric Eraser

Featured


I know that an electric eraser sounds really lazy, but it is actually useful and fun to make. This is a fine example of chindogu. It erases quickly and neatly, but is a hassle to carry and use and makes you look lazy.

Here's what you'll need. I got everything from RadioShack except the eraser:
1.5-3VDC motor
Mini momentary switch
4x2x1 project box
• Eraser - I just pulled mine out of the top of a pencil.
2 AA battery holder (you need to use the one I linked so that it will fit in the box)
9V battery snap for the battery holder
• Strong glue (I used E-6000... hot glue should be fine)

Step 1
Prepare the box. Place the motor in the box and mark where the shaft is. Drill a hole big enough for the shaft and the first small base to fit into. Using a dremel with sanding attachment, sand off the little vein-thingies so your motor goes in all the way. Place the motor back in and put the battery holder in (with the snap on) and find a place on the box lid where the switch can go without hitting anything. Drill a hole for it and then mount the switch to ensure it fits, then remove everything.

Step 2
The circuit.
The circuit is really simple. Run the ground (black) wire from the battery pack to either of the motor leads. Twist on and solder or use tape to make a good connection. Run the positive (red) wire from the battery pack to one lead of the switch. Solder or tape. Run a wire from the other lead of the switch to the other lead of the motor. Press the button and the motor should spin! If not, check all the connections and make sure the batteries still have some juice. Simple, huh?

Step 3
Installation.
Mount the switch in the hole you drilled earlier. Put the motor through the hole and use hot glue (I actually used E-6000 glue) to secure it in place. Before you put in the battery pack, put a piece of tape over the metal tab on the end of the battery pack without the snap connector. Now squeeze it in the box. It's a REALLY tight fit. When putting the top on the box, be gentle. The motor is fairly large- large enough that I could not shut the box all the way. I just screwed it in until I felt like I was about the break the box.

Step 4
Eraser.
Poke a small hole in one end of the eraser. Put super-glue on the motor shaft and then push the eraser on.

Step 5
Go erase stuff! Push the button to get the eraser spinning, and go erase stuff like a real geek!
Now that is cool
clcok5111 year ago
one step closer to being in the world of wall-e
This seems pretty cool, but have you thought of using this in a contest, I would like to see you be in the top!
Does this actually work? I would've thought that the eraser would stop moving once you touch the paper.
That is soo cool!
DoctorDv2 years ago
This is awesome! You could probably even find a way to fit it in a empty gluestick to save space and to make it look natural.

-Doctordv
Adambowker98 (author)  DoctorDv2 years ago
Good idea! I could just put the button on the bottom of the stick to make it not noticeable!
Or maybe you could hold the glue stick like a pencil and put the button right where your thumb is so it looks and feels natural. Good Luck!

-Doctordv
Adambowker98 (author)  DoctorDv2 years ago
Maybe..l my main problem with the glue stick is that I want the batteries to be easily changeable and I'm not sure how I would do that in a glue stick.
rimar20002 years ago
Good work, Adam!
Adambowker98 (author)  rimar20002 years ago
Thanks!
ale6242 years ago
hahaha! great idea, looks fun to use too!
Adambowker98 (author)  ale6242 years ago
It is really fun!
yoyology2 years ago
Electric erasing machines used to be standard equipment in drafting shops. They are still widely available. https://www.google.com/search?q=electric+eraser&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a#q=electric+eraser&hl=en&client=firefox-a&hs=Vw2&rls=org.mozilla:en-US:official&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&psj=1&ei=uu34T_rJMazs2AXUqpCCBw&ved=0CHsQsxg&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=15f4f2ff325d4b5a&biw=853&bih=563
Adambowker98 (author)  yoyology2 years ago
Didn't know that! Cool!
omnibot2 years ago
Nice.
Not sure if Chindogu or actually really useful.
Adambowker98 (author)  omnibot2 years ago
Useful until everyone you know calls you lazy and then u have to try to carry it around everywhere. Then it sucks.
sonicase2 years ago
lol, nice
post a video!
Adambowker98 (author)  amandaghassaei2 years ago
video posted!
Nice job, excellent Chindogu indeed!
davijordan2 years ago
Cute.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!