Print PDF
Favorite
Email
Step 2Mounting the sprocket
The MBS brake system comes with the mounting hardware (screws and spacers) needed to mount the sprocket to the wheel.
I used the pattern from the brake rotor to drill holes for the mounting screws into the sprocket. The initial holes were then widened to allow the mounting screws to sit flush against the sprocket.
I used the pattern from the brake rotor to drill holes for the mounting screws into the sprocket. The initial holes were then widened to allow the mounting screws to sit flush against the sprocket.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
