Introduction: Electric Water Gun
Hello friends in this instructable i show you how to make electric water gun for Holi festival. As all you are know that in india number of festival are celebrate. Holi is a festival of color and love, In this festival kids use normal water gun to throw water to other friends. here we are showing you that how to make electric water gun to throw water at more distance. In this project main parts is water pump and battery. This water pump take the water from bottle and throw water from the outlet nozzle.
See above video of electric water gun, so you can easily understand all the step of instructable. If you like our video than please subscribe our youtube channel. ( CREATIVITY BUZZ )
Follow us on our website :- www.creativitybuzz.org
Tools to be used:-
Material to be used:-
Step 1: BOTTLE PREPARATION
Take one water bottle or any liquid bottle of capacity 3 liter,so we can stored more water color inside bottle and you can enjoy your electric gun for more time.
Now we have to make one hole on bottle cap with the help of drill machine to insert inlet of water pump.
Step 2: PVC SELECTION
This project is mainly contain PVC. In this instuctable we use PVC Tee, Pipe, Elbow, Coupling, End cap. All the parts are shown above in images, so you can easily understand.
Step 3: PUMP INLET ARRANGEMENT
We need to make this project leak proof. so here we put one pvc coupling of 1" diameter at the bottle cap. as per image we have to cut this pvc with the help of cutter. stick this pvc coupling with bottle cap by glue gun, due to this as we rotate pvc coupling bottle cap also rotate.
Step 4: WATER PUMP FITTING
Water pump is used for the to take liquid from one place and transfer to other place with high pressure. so pump have to port, one is inlet and other is outlet. Both the port are shown in above images. We use 9V water pump and their inlet and outlet shown in image.
We stick the inlet of water pump with hole of bottle cap, so we can take water from bottle. And outlet of pump is placed between cut portion of pvc coupling shown in above images.
Step 5: PVC GUN SHAPE
As per our title water gun, we need to make gun shape with the help of PVC Tee, Pipe, Elbow, Coupling, End cap. See above images and follow step by step process so you can make shape like a gun.
Step 6: SILICON PIPE ( 3 Mm) FITTING
To transfer water from inlet to outlet we need silicon pipe of diameter 3 mm. who carry the water and send at high pressure.
First make hole for silicon pipe on T pvc with the help of drill machine. Insert the silicon pipe and take it through end cap. Join the nozzle at the end of silicon pipe so we get high pressure at outlet.
Join the silicon pipe with outlet of water pump so we get water from inlet of pump.
Step 7: CONNECTION
To run the water pump we need 9V battery. for that we have to make space for that. Insert switch on pvc pipe hole and insert the battery inside pvc pipe from other end. close this with the help of end cap.
Take the wire of pump through T pvc and join with switch and battery as per connection diagram shown in a images.
Step 8: FINAL ARRANGEMENT
After connection diagram our gun is ready. now remaining is to put bottle at inlet of water pump by rotating bottle.
Now our final assembly is ready to throw water at high pressure.
Step 9: ENJOY YOUR WORK
By pressing switch water is out from nozzle at high pressure. so you can throw water at far distance. i hope you can enjoy with your friends by this electric water gun.
Step 10: VIDEO
If you not understand the instructable than you can watch our video to make electric water gun easily.
If you like video than share with your friend also.
Thanks for read_----- ( By Team CREATIVITY BUZZ)
We have a be nice policy.
Please be positive and constructive.