Print PDF
Favorite
Email
Step 5Mounting in the car
Since this IS high voltage, and I don't know enough yet about waterproofing
I mounted the EL display on my back window, with the power supply / wi-fi sensor
mounted behind the rear panel of my hatchback
Because everyone's car is different, These pictures may not be helpful,
But I posted a few anyway
The unit mounted to the Glass, and the High voltage wire, mounted to the frame [Picture 2]
Another picture of the EL Display [Picture 3]
The Power unit mounted in the door [Picture 4]
(I may have to relocate it, or add a antenna to get a better wi-fi reception)
I mounted the EL display on my back window, with the power supply / wi-fi sensor
mounted behind the rear panel of my hatchback
Because everyone's car is different, These pictures may not be helpful,
But I posted a few anyway
The unit mounted to the Glass, and the High voltage wire, mounted to the frame [Picture 2]
Another picture of the EL Display [Picture 3]
The Power unit mounted in the door [Picture 4]
(I may have to relocate it, or add a antenna to get a better wi-fi reception)
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 22, 2010. 11:54 PMOmegaNemesis28
says:
Im curious as to how one would go about learning how to wire it like you did but for my car. I have a GMC 2010 Terrain. Are there wiring information one can find online or do you need to just go in there and check it out for yourself?
Reply
 |
Add Comment
|
