Print PDF
Favorite
Email
Step 6Power it up
1) set the battery charger to a low setting (6v 1.5 amp works great for me)
2) Turn on the charger.
You should see tiny bubbles start to form all over the tool. As the process progresses, the rust will start to flake off and the water will become muddied with rust and goop and foam depending on how fast the bubbles are forming.
2) Turn on the charger.
You should see tiny bubbles start to form all over the tool. As the process progresses, the rust will start to flake off and the water will become muddied with rust and goop and foam depending on how fast the bubbles are forming.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
