Print PDF
Favorite
Email
Step 4Wind bobbin
Scrolling to the bottom of the design table spreadsheet will reveal a number of wire guage choices. Hopefully, one of these will work with your amplifier.
Wind the magnet wire onto the bobbin. With either a lathe or a bobbin winding machine. Try to keep relatively constant tension on the wire as you wind the coil.
Wrap electrical tape around the finished windings or pot in epoxy.
Wind the magnet wire onto the bobbin. With either a lathe or a bobbin winding machine. Try to keep relatively constant tension on the wire as you wind the coil.
Wrap electrical tape around the finished windings or pot in epoxy.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
