Print PDF
Favorite
Email
Step 11Installing the Button Switches
The button switches should be positioned next to each of the locations in your map labels.
1. Using a screwdriver or a pencil, puncture the foam board at the location of each switch, as shown in Figure.
2. Add the switches, securing each with a nut on the top, as shown in Figure. (NOTE: You may need to compress the foam board slightly to thread the nuts securely onto the button switches.)
1. Using a screwdriver or a pencil, puncture the foam board at the location of each switch, as shown in Figure.
2. Add the switches, securing each with a nut on the top, as shown in Figure. (NOTE: You may need to compress the foam board slightly to thread the nuts securely onto the button switches.)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
