Print PDF
Favorite
Email
Step 12Installing the LEDs
The LEDs should be positioned on the map board to highlight your selected locations.
1. Using a screwdriver or other tool, make a small puncture in the map panel where you want to position the LEDs.
2. Push the LED pins through the panel and bend them apart slightly to secure the LEDs in place, as shown in figure below.
1. Using a screwdriver or other tool, make a small puncture in the map panel where you want to position the LEDs.
2. Push the LED pins through the panel and bend them apart slightly to secure the LEDs in place, as shown in figure below.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
