Step 15: Attach
Solder the red wire from the piezo to the signal wire of the cable.
Solder the black wire to the cable's shielding.
Epoxy it all to the back of the cabinet handle in such a way that the solder joints won't make contact with either each other or the handle itself.
Solder the black wire to the cable's shielding.
Epoxy it all to the back of the cabinet handle in such a way that the solder joints won't make contact with either each other or the handle itself.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
