loading
finally here is the instructable from my newest knex ball machine elevation. it has four lifts divided into two networks. three of these lifts are new: the door lift, the returning arm lift and the parallel arm lift. there is a wheel lift too.
Elevation has 9 paths: 4 at network 1 and 5 at network 2. the path separator at network 2 is a new one i came up after watching dragon gem. there are also many new elements and an E on top %D
video is below

 
1-40 of 92Next »
KneXtreme2 years ago
Hi martijnb95. I am trying to remake the returning arm lift and was wondering, where is the motor located on picture 19?
jameshond3 years ago
is de ballmachine nog heel if is hij gesloopt
martijnb95 (author)  jameshond3 years ago
gesloopt en gesorteerd.
ik ben bezig met een nieuwe :)
ik ben benieuwd
heb je daar al foto's van ?
jameshond3 years ago
ik vind de returning arm lift cool hoe heb je die gemaakt????
martijnb95 (author)  jameshond3 years ago
ik wilde een ible maken, maar de foto's zijn verloren.....
geen instructies dus :(
ok jammer :(
Happy9993 years ago
Hello,
You have the best and most amazing ball machine I have ever seen! Thank you so much for putting the video and the pictures. We are going to make one like yours.
Hello,
I have made the elements so far that you have showed for Elevation. Now I am making the arm lift. Thank you for putting it online.
The only thing I did differently is on these pictures I will send you. On one, I made it so it releases with just one ball. Your designs are very good.
P2164695.JPGP2164696.JPGP2164697.JPGP2164698.JPG
martijnb95 (author)  Happy9993 years ago
hi,
I (finally) put the three first pictures in my elements guide. thanks for the support!
martijnb95 (author)  Happy9993 years ago
Hi,
Thanks for the awesome comment! I would like to see your bsll machine. Have you seen the elements instructable yet? There are lots of step by step instructions for elements.
Fantastic !
~KGB~3 years ago
Looks amazing! =D
martijnb95 (author)  ~KGB~3 years ago
Thanks. 8•>
Np.
martijnb95 (author)  ~KGB~3 years ago
kk
=D
martijnb95 (author)  ~KGB~3 years ago
@0,o@
XD
martijnb95 (author)  ~KGB~3 years ago
!)
?
martijnb95 (author)  ~KGB~3 years ago
retro smiley
Kk.
martijnb95 (author)  ~KGB~3 years ago
:3)
=P
martijnb95 (author)  ~KGB~3 years ago
#:)
=D
rlipton3 years ago
Your ball machine is awesome!!!!!
martijnb95 (author)  rlipton3 years ago
thanks X)
Tornado963 years ago
Can not remember if I already commented or not but It looks awesome!

The only thing I can say is don't spend so much time filming the lifts. Everything needs it's fair share! ; )
martijnb95 (author)  Tornado963 years ago
yeah i know, the next one will have a better video.
Awesome! I hope you post instructions for some of the elements/lifts.
martijnb95 (author)  Purple Waffles3 years ago
instructions are here
http://www.instructables.com/id/elevation-elements/
more is coming soon
martijnb95 (author)  Purple Waffles3 years ago
Yes, instructions will come 8)
All of your lifts, The door lift, The parallel arm lift and all the others are so incredebly AWSOME i wish i could build something like that!!
martijnb95 (author)  CassisDude983 years ago
Thanks i use my special methode to make new stuff 8)
Cen you tell me that special method???????????? (please)
martijnb95 (author)  CassisDude983 years ago
no i was joking there isn´t any methode.
but think just about a cool move a ball can make, then build that from knex :D
martijnb95 (author) 3 years ago
i've finished the video. it will be up this weekend (gmt+1)
1-40 of 92Next »