Introduction: Ember User Manual Elements

Picture of Ember User Manual Elements

This guide contains elements that can be used in the Ember User Manual.

Step 1: Detailed Safety Alert Symbol and Message

Usage

Use when first defining a hazard in the Hazards section of the user manual


DANGER
INPUT TYPE OF HAZARD

INPUT HOW TO REDUCE CHANCE OF OCCURRENCE

INPUT CONSEQUENCE OF NOT FOLLOWING INSTRUCTION


WARNING
INPUT TYPE OF HAZARD

INPUT HOW TO REDUCE CHANCE OF OCCURRENCE

INPUT CONSEQUENCE OF NOT FOLLOWING INSTRUCTION


CAUTION
INPUT TYPE OF HAZARD

INPUT HOW TO REDUCE CHANCE OF OCCURRENCE

INPUT CONSEQUENCE OF NOT FOLLOWING INSTRUCTION


Example



WARNING
Toxicity Hazard

Do Not use parts produced from this machine for storing, serving or touching food and drink

Failure to do so can result in poisoning or other injury

Step 2: Safety Alert Symbols and Messages

Usage

Use throughout the user manual when the user should be notified of pre-defined hazard listed in the Hazards section of the user manual



DANGERINPUT MESSAGE HERE


WARNINGINPUT MESSAGE HERE


CAUTIONINPUT MESSAGE HERE



Example



WARNINGWhen handling resin wear protective gloves/protective clothing/eye protection/face protection

Step 3: Notes

Usage

Use to add supplementary information that some user will NEED to complete the step



Note:

INPUT NOTE INFORMATION

  1. INPUT LINE 1
  2. INPUT LINE 2
  3. INPUT LINE 3
  4. INPUT LINE 4

Example


Note:

On OSX 10.9 you may get the message "can't be opened because it is from an unidentified developer." To avoid this,

  1. Navigate to the file in Finder
  2. Hold the “CTRL” button and click on the file
  3. Select “Open” from the menu
  4. At the prompt, confirm that you wish to open the file

Step 4: Tips

Usage

Use to add supplementary information that could be useful to users



Tip:

INPUT TIP

  1. INPUT LINE 1
  2. INPUT LINE 2
  3. INPUT LINE 3
  4. INPUT LINE 4

Example


Tip:

Keep your packaging in case you need to ship Ember.

Comments

About This Instructable

443views

2favorites

License:

More by ppalin:How to fit a swiper mechanism to EmberConverting Map Height Data Into 3D TilesHow to configure Ember for High Speed 3D Printing
Add instructable to: