Introduction: Emergency Soda Can Whistle
On this instructable, I am going to show you how to make a emergecy whistle out of a can!!!
Step 1: Materals
Empty soda can
sissors
Step 2: The Cylender
Cut the top and bottom off of the can.
Step 3: Cutting the Cylender
Cut the cylender in half like the pic. below:
Step 4: 1 In. Cut
On the bottom of the sheet of aluminum, measure about an inch, and cut it strait up to where it looks like below:
Step 5: Cut IT in Half
Cut the piece in half hot dog style.
Step 6: Cut IT in Half AGAIN
Choose one piece and cut it in half hamburger style
Step 7: The Cross
Take the long piece and a short piece and make a cross, like the pic. below:
Step 8: Folding the Cross
Do the following: flip the cross upside-down and fold the sides in, to where it looks like below.
Step 9: 90* Fold
Fold the leftover metal 90 degrees down.
Step 10: Metal Roll
Roll the metal to where it looks like a game whistle.
Step 11: Opening the Blowhole
With the leftover piece of metal, do this: shap it like a twig, and stisk it in the "blowhole" to make it bigger.
Step 12: Completed Whistle
This is what it should look like now.
Step 13: How to Use
BLOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(Make adustments to where you get a sound :-)
