Vinyl and felt
3M vinyl adhesive
Liquid nails adhesive
1/4 phone jack
Sides are 9" top to bottom and 9" back to front
Gluing all this together form a rectangular box with
open back and open front, i used 3/4" by 3/4" wood to joint
all four angles together and to attach the back and front covers.
with the vinyl outside. To glue the vinyl cut it 1/2" wider than
the enclosure to fold it thru the inside by the edges use the staples to keep it firm
Spray the 3M adhesive all over the vinyl and the wood
wait for about 4 minutes and place the the enclosure on top
of the vinyl by the very end and start wrapping the enclosure up
make sure you do it evenly.
The audio out was going straight to the speaker so now is gong to the
1/4 phone jack and from here goes to any speaker cabinet.
the metal plate is use in construction for electrical purpose, the power jack is
from an old printer.