Introduction: Engraved Wooden Popsicle Wooden Cuff

Picture of Engraved Wooden Popsicle Wooden Cuff

This is a simple and classy engraved wooden cuff made out of only popsicle sticks!

Step 1: BoM

Picture of BoM

* Packing Tape

* Popsicle Stick

* X-acto blade

Step 2: Tape and Engrave

Picture of Tape and Engrave

Tape two pieces of popsicle sticks together and engrave it with any message you like with an x-acto blade.

Step 3: Soak

Picture of Soak

Soak it in hot water for about 30 minutes.

Step 4: Bend

Picture of Bend

Place the soaked popsicle stick onto a drinking glass to form it into a cuff shape, let it dry!

Comments

About This Instructable

52views

1favorite

License:

Bio: Aerospace Engineer working in Software Development with a passion for Hardware.
More by TechMartian:Flying Captain America's Shield - RC PlaneWide Angle ShotsLED Ping Pong With Shift Register
Add instructable to: