Print PDF
Favorite
Email
Step 4Seal Up The Etch-A-Sketch
This sounds simple, but you're forgetting the super sticky aluminum powder.
At this point it will be EVERYWHERE!
Try to get as much of it as you can back into the Etch-A-Sketch, then super glue the screen back on.
Then put the plastic cover and the knobs back on.
I can pretty much guarantee that the aluminum powder will find a way to seep out, so i would suggest putting a tape seal around the seam of the Etch-A-Sketch, just to be safe.
At this point it will be EVERYWHERE!
Try to get as much of it as you can back into the Etch-A-Sketch, then super glue the screen back on.
Then put the plastic cover and the knobs back on.
I can pretty much guarantee that the aluminum powder will find a way to seep out, so i would suggest putting a tape seal around the seam of the Etch-A-Sketch, just to be safe.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
