Introduction: Epoxy Resin Dining Room Table

This is a coffe table I made out of pine 2x6s with a 1/4 inch raised edges, and the n I poured 2 part epoxy resin into it. I also placed in a middle of the table a 1/4 inch thick metal piece "spirit of Detroit" that I bought from a local artist. For the legs I used black pipe and flanges, worked out well. Very easy project that anyone could do. 2x6s and black pipe were purchased from Home Depot and the Epoxy resin from Amazon, the guy that sells it is also located in Michigan. The table is 6 feet long and 28 inches wide, really big. But we needed a big coffee table and couldnt find one so I built one ;). Total spent, about $300.00. One of a kind, cant beat that.

Step 1: Step 1

This is a coffe table I made out of pine 2x6s with a 1/4 inch raised edges, and the n I poured 2 part epoxy resin into it. I also placed in a middle of the table a 1/4 inch thick metal piece "spirit of Detroit" that I bought from a local artist. For the legs I used black pipe and flanges, worked out well. Very easy project that anyone could do. 2x6s and black pipe were purchased from Home Depot and the Epoxy resin from Amazon, the guy that sells it is also located in Michigan. The table is 6 feet long and 28 inches wide, really big. But we needed a big coffee table and couldnt find one so I built one ;). Total spent, about $300.00. One of a kind, cant beat that.

Step 2: Step 2

This is a coffe table I made out of pine 2x6s with a 1/4 inch raised edges, and the n I poured 2 part epoxy resin into it. I also placed in a middle of the table a 1/4 inch thick metal piece "spirit of Detroit" that I bought from a local artist. For the legs I used black pipe and flanges, worked out well. Very easy project that anyone could do. 2x6s and black pipe were purchased from Home Depot and the Epoxy resin from Amazon, the guy that sells it is also located in Michigan. The table is 6 feet long and 28 inches wide, really big. But we needed a big coffee table and couldnt find one so I built one ;). Total spent, about $300.00. One of a kind, cant beat that.

Step 3: Step 3

This is a coffe table I made out of pine 2x6s with a 1/4 inch raised edges, and the n I poured 2 part epoxy resin into it. I also placed in a middle of the table a 1/4 inch thick metal piece "spirit of Detroit" that I bought from a local artist. For the legs I used black pipe and flanges, worked out well. Very easy project that anyone could do. 2x6s and black pipe were purchased from Home Depot and the Epoxy resin from Amazon, the guy that sells it is also located in Michigan. The table is 6 feet long and 28 inches wide, really big. But we needed a big coffee table and couldnt find one so I built one ;). Total spent, about $300.00. One of a kind, cant beat that.

Comments

author
MikB (author)2017-09-16

Looks great, but I get a sense of deja vu reading the step by step instructions :)

Did you have a cut and paste accident?

About This Instructable

421views

12favorites

License:

Bio: HI My name is Adnan Medic, I am originally from Bosnia and have been living in Michigan for about 20 years. I like to Sail ... More »
More by Medic55:Epoxy Resin Dining Room Table Cable Reel TableDIY Beer Kegorator
Add instructable to: