Introduction: Esp8266 + Sensor Temperarture DS18B20 to Emoncms
Temperature monitoring using the ESP8266 + Temperature sensor DS18B20 (OneWire) + Arduino IDE and Emoncms platform module.
Emoncms can be installed on a web host, in this case and pre-installed on my local server.
More information visit my channel ...
Blog PDAControl English
Project development based on open source developed by Trystan Lea, this application has tools for measuring energy or electricity consumption, mixing hardware and software which is available to anyone who wants to start measuring and regulation of energy consumption, the purpose of this project is sustainable development.
Step 1: Programming With Arduino IDE ESP8266
Our module is programmed using the Arduino IDE.
Components and materials required for testing
1 FTDI Serial converter- usb
Step 2: Connecting the Arduino and Sensor DS18B20
1 The esp8266 module has 2 gpio and use the GPIO 2 for temperature reception via OneWire.
2 Wireless network parameters are set the code.
3 Sensor connection uses only 2 wires, gnd and OneWire plot, taking into account the connection of resistance
Step 3: Testing
Using the serial debug terminal:
- the correct reading of the sensor from the ESP8266 and the corresponding value.
- Emoncms communication with server and sending JSON from the ESP8266.
The ESP8266 send data and Emoncms platform makes graphics and data processing in real time.
We have a be nice policy.
Please be positive and constructive.