Print PDF
Favorite
Email
Step 2Plugging all together
Plug the Ethernet shield at the arduino board (look how amazing they fit).
Connect the LED to the arduino PIN. I use the pins, 7,6,5 and 4 for this.
You can add 2 button on pin 8 and 9.
Connect the RJ45 cable from the Ethernet shield to your router.
Next Step, going online!
Connect the LED to the arduino PIN. I use the pins, 7,6,5 and 4 for this.
You can add 2 button on pin 8 and 9.
Connect the RJ45 cable from the Ethernet shield to your router.
Next Step, going online!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
