This is the upgraded version of the Excalibur I showed in my last instructable

Pretty straight forward design, holds 7 shots in the mag and the ram is easy to pull back cos its so short. The distance it shoots really depends on the number of rubber bands u put onto it so i cant really say.

Step 2: The Handle

Picture of The Handle
You can see on the later steps how these two parts fit together

Step 4: Mag

Picture of Mag

Step 5: Trigger

Picture of Trigger

Step 7: Final Step

Shoots grey connectors. works best when the hole on the connector is towards the ram and the connecting bit is away from it.
Remove these adsRemove these ads by Signing Up
not too bad :)