Print PDF
Favorite
Email
Step 2Reservoir Lid
Drill 1/4 and 3/8 inch holes in lid as shown. Be careful to keep holes as perfectly round as possible and spaced to allow for bottle threads when screwed on.
Cut ends of 1/4 inch and 3/8 inch tubing on an angle for easier feeding through the undersized holes.
Feed approx. 12 inches of the 3/8 inch tubing and a small amount of the 1/4 inch tubing through lid as shown.
Screw cap onto one of the bottles.
Cut ends of 1/4 inch and 3/8 inch tubing on an angle for easier feeding through the undersized holes.
Feed approx. 12 inches of the 3/8 inch tubing and a small amount of the 1/4 inch tubing through lid as shown.
Screw cap onto one of the bottles.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
