Print PDF
Favorite
Email
Step 2Disassemble
Remove the four rubber feet on the bottom of the easy button, revealing the screws that hold it together. Remove the four screws. Lift the top off.
Remove the two screws holding the circuit board down, remove the circuit board and the spring steel below it.
Finally, remove the last four screws and the bracket they hold down so we can see the speaker and bottom plate.
This might sound complicated, but just take everything apart.
Remove the two screws holding the circuit board down, remove the circuit board and the spring steel below it.
Finally, remove the last four screws and the bracket they hold down so we can see the speaker and bottom plate.
This might sound complicated, but just take everything apart.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
