Expanded Vocabulary Easy Button

Step 6 Assemble

Carefully route the wires so they don't stick out anywhere and get pinched. Set the spring steel down over the circuit and make sure it won't touch any parts when depressed. Set the original circuit board down on top and screw it into place. Finally reassemble the main parts, put the four screws back in the bottom and put the rubber feet back in.

To record a message, hold down the pushbutton on the bottom and speak into the microphone. It is reasonably sensitive and has automatic gain control so you don't have to yell into it. Now press the big button on top to play back your message. It is similar in volume to the original, but a lot more fun.