With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
When one of the girls I work with was starting Middle School she wanted something special to wear for school and her Mom was broke. She found this way...
You will need:2 pieces of Glitter Foam with an adhesive backingScissors, Exacta Knife or Die CutterMounting Materials, i.e. stick on magnets, double ...
Design and cut your foam for the front side. If you are not using a die cutter (Karry is using my Crucit Expression Machine here) draw your design o...
Flip the foam (front side piece) over and starting at the top of your design peel away the paper backing from all areas you want to stick to the backs...
Place the second piece (back side piece) of Glitter foam on top of the front piece with the Glitter Side facing the adhesive and smooth out
Flip the Glitter Foam over to the front side and carefully peel away the unwanted parts of the front foam to expose your design.
Decide how you want to hang your project. You can simply peel off the adhesive backing and stick it up on your door or in your school locker, but re...
Remove these ads by
Signing Up
Not NiceInappropriateSpam1,271 views
2 favorites
Posted:
Sep 1, 2009
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »