Introduction: Extra Kitchen Lights

Picture of Extra Kitchen Lights

Today, I am going to show you how I illuminate my kitchen with power led extra. When power cut is happened, there are 2200mAh batteries with me to put my kitchen to illuminate. So, I don't need to live in dark side of life with this project. In general, our kitchens have only one point illumination, and this is usually on the top of kitchen. When it is night, you can only see your shadow on your kitchen countertops that I dislike this. I needed to see the countertops but it was dark. In brief, with this project, I made an innovation in my kitchen's illumination.

The need list:

  1. Hot silicon glue
  2. Soldering iron with solder
  3. Electrical tape
  4. Male DC power adapter
  5. Wire
  6. Old phone adapter with female usb out
  7. Male usb cable
  8. Power LEDs (Color: amber) (5-10 pieces up to your kitchen length)
  9. Female adapter pin
  10. Multimeter
  11. Nippers

Step 1: Video Explanation

On this video, open English subtitle to understand the video.

Step 2: Other Details

Picture of Other Details

In my project, I only use 10 ohm Liket resistance in serial because my old adapter is below 5V it is approximately 4.25V. If you are not sure, you can use potentiometer to change the brightness.


That's all !

Step 3: BONUS: Reading This Instructable

NOTE: This instructable's step is aimed for visually impaired people to hear the sentences to learn what's going on here. Watch the video, it explains all steps.

Step 4:


About This Instructable




Bio: Living in Istanbul, answering your questions :)
More by Bay Yolal:How to use Raspberry Pi 3 Model B+ V1.2 For The First Time!How to knit baby booties in only one hour! Ta-Da!How to Extract Walnut
Add instructable to: