Hello, I decided to make an Extreme Guide to Knex Ball Machine Stuff. I dont build High, as i dont have a million pieces. Enjoy!
I have a ton more elements, and I'll add more from time to time.
Step 1: Chain Link
This is The Ball Pick up on chain_
Step 2: Basic pathing
This is Basic Pathing. Lol.
Step 3: High Velocity Pathing
***Put tubing on this***
Step 4: Loopty Loop
Put tubing on this!
Step 5: The Stairs
*featured in The Big ball factory*
Step 6: Classic Stairs
*Featured in The big ball Factory*
Step 7: Ball Arm
*featured in the big Ball Factory, this is MY remake of it*
Step 8: The Cage
*featured in the Trampoline Tower*
Step 10: Lift Drop
*Featured in the Big Ball Factory
Step 11: Horizontal Ball Rotators
Step 12: Basket
Featured in Trampoline Tower
Used to catch balls
Step 13: Yellow Turns
Used to make good turns without tubing
Step 18: Control splitter
Step 19: Trap Door
The ball rolls and falls through the mini-door, and then closes back up.
Step 20: Skinny Pathing
err Yellow connector Path
Step 21: Flexi Loop
**make this a little longer**
The ball travels down, and then launches most likely flying into a basket
Step 22: Scale
A ball Falls onto the end with the yellow connector, and then another ball falls on the other side, and then they both fall to the same side most likely to continue on the same path.