With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This instructable is going to teach you how to attach an antenna to a USB WIFI adapter. Lets get started! Visit my blog for more stuff! : http://tec...
You will need: USB WIFI Adapter Flat head screwdriver External Antenna Copper wire (about 1 mm) Scissors and tape (or hot glue) Tools (Not shown): Dr...
Using your flat head screwdriver, gently pry apart the USB WIFI stick. Now look your circuit board. Mine had a single little rectangle antenna inside....
Insert the copper wire into the small end of the antenna. Use hot glue to seal it. http://techreviewerblog.blogspot.com/
Mark out a hole on the top where the little antenna inside is. Drill it out, and bend the little metal you connected to the antenna about 80 degrees. ...
In testing before and after Windows showed the connection improved from "good" to "excellent". The internet speed increased 10mbps! OMG! In all this e...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »