With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here is a fun sewing project that anyone can do. Make yourself an glasses case to protect your specs! You’ll need: 9″ by 9" piece of fabric. (I used...
Step 1: Pin the outer fabric and the cotton batting together. Sew the two layers together, using vertical lines spaced about 1 inch apart.
Step 2: Use a rotary cutter and ruler to square up the fabric. Trim the edges so that the finished piece measures 8.5" by 8.5".
Step 3: Fold the outer layer in half, right sides together. Pin, and sew along the long side and 1 short side, using a 1/4 inch seam allowance.
Step 4: Turn the fabric right side out. Use a long, blunt object (like knitting needles) to poke out the corners.
Step 5: Time for the lining. Fold the lining fabric in half, right sides together. Sew along the long side, using a 1/4 inch seam allowance. Sew a...
Step 6: Slip the outer piece inside the lining as shown. Pin the two pieces together and stitch around the opening.
Step 7: Pull the outer piece out through the opening in short side of the lining fabric. Don’t tuck the lining in just yet.
Step 8: Hand stitch (or let's be honest, machine stitch) the opening in the lining fabric closed.
Step 10: Tuck the lining in, again using a long blunt object to poke out the corners. Ta da! You did it. *For personal use only, please.
Remove these ads by
Signing Up
Not NiceInappropriateSpam10,793 views
62 favorites
Posted:
Feb 5, 2010
License:
None (All Rights Reserved)
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »