F2000

Here is my SSV F2000. If you would like information on it, please refer back to my slideshow on it.

This is the instructable for the gun. A few people wanted it so here you guys go. 
But before you build it, take a look at the pros and cons:

Pros:

• Good power
• Good accuracy
• pretty easy to load
• Doesn't use any broken parts

Cons:

• Uses two of the orange yellow connectors with the tab on top. (You need these)
• Uses lots of parts

Need help with anything? Drop a comment.

Step 1: Sight (optional)

If you don't want to waste all of your parts, you don't have to make the removable sight. But if you do it makes the sight and the gun look a little bit cooler.

Comments

[OZKNEX22]

i built this it is awesome but don have enough yellow connecters for the mag [suck for me]

[OZKNEX22]

lol i did this

[Knex.X]

How do you cock the gun when a bullet is loaded? You'll have to get the bands past the bullet.

[saberwing]

I've just built this, and man oh man do my fingers hurt! It's a really cool gun, but it has a couple of issues, mainly the fact that it is really unreliable, hard to load, and hard to cock. In order to reload, one must pull the band back with both hands, and up and around the ratchet. It's a great gun, but it is not currently battle worthy.

[NiHaSxNaMkOl]

Is the gun semi-auto?

[Seleziona]

Nope! It is not..

[Kinetic]

This is awesome. I can't believe I hadn't noticed it before.

[Seleziona]

Hey man, I'm hardly on here anymore :/ But I thank you for the compliment!
*sigh.. I'm not active at all anymore, maybe once every three weeks. I know how many people liked my stuff but I think I've lost interest in instructables and knex! :(

[Randomguy65]

I'm not bothering to get on here anymore either. (Sup? :)) Instructables takes 5 goddamn years to load, so I don't bother with it. Even Shadowman39 isn't active. (Though he is working on something.)

[rheath2]

(removed by author or community request)

[rheath2]

Did I say that? =P

[Seleziona]

:P

[rheath2]

H-HOLY **** THAT IS ****** AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[PotatoCoffee]

Great shape!

[The Nomlack]

Awesome. Can you give me a green rod count without the sights please? I really wanna make it! I currently have your Gargoyle built and its awesome! I made it and figured after the build that i didn't have any 2 slot grey cons left to make a shell!

[AUG-5OM3]

Build it and it is awesome. But is it normal you can only pull the trigger like two millimeters?

[Seleziona]

Umm, I think so. Does the trigger not work?

[AUG-5OM3]

Well yes it does, it fires great but it feels like you dont do anything at all.

[Seleziona]

Is that good?

[SpeedStrikerXLR]

now... Make a Grenade Launcher that works... jk lol

[AUG-5OM3]

Yeah, and I added a barrel part at the front.

[Chr!sR]

Is there any way to build it without a tabbed connector?
I really want to make this gun but I don't have any

[jiansy]

question, this gun would be amazing, but for some reason the bullet is missing the exit barrel and it wouldn't if i could get the mag to stay the same height like in the picture so how would you get the mag to stay there or is it just friction?

Sincierly ,
jiansy

[Seleziona]

It is just friction. Put some tape around it and it should stay up there better.

[jiansy]

dear seleziona, i built you SSCB-11 and it was awesome, i destroyed a plastic tape dispenser in two shots. Nice Now im building the F2000.

[Seleziona]

Wow! That's sweet man! Thank you, and I think you will like this a lot more :D Tell me what you think about it.

[headlessknight]

f2000
part list
sight opt
con
yellow 20
red 2
lt grey 8
green 2
orange 3
rods
greens 37
white 12
blue 2

top rail
con += with sight
yellow 92
lt grey 3
green 9
orange 1
rods
green 91
white 4
blue 28+4
misc
tan clips 2+4
blue clips +4
y clips 1

stock
con
yellow 31
red 15
lt grey 5
green 10
white 23
grey 3
orange 5
rods
green 105
white 27
blue 13
flexi red 3
misc
y clips 7
male ball joint 2
blue clips 3
tan clips 2
hingies 3
blue spacers 4

front body
con
yellow 26
green 9
white 6
grey 3
red 9
orange 9
3d blues 5
3d puprles 1
rods
green 68
white 19
blue 8
yellow 1
red 1
misc
y clips 3
female ball joints 2
male ball joints 2
hingeis 3
blue clips 1
blue spacers 4

front bits
con
yellows 8
reds 2
green 2
grey 3
rods
greens 4
white 2
blue 9
AND EVERYTHINGS BETTER WITH A BAG OF WEED A BAG OF WEED

[Seleziona]

Nice :D

[headlessknight]

I got tried of seeing people asking for part list
so I took matter in my own hands a made one

[Red-Dragon]

hey there when you pull back the rubberband, doesn't it push the bullet away?

[Seleziona]

Nope, it slides over top of the bullet so it goes down a little and then you hook the elastic on the ratchet.

[Sharir1701]

hey man i admire your work and just wanted to hear your opinion on my new gun and first replica... it still needs a few tweaks here and there, but it'll do fine like this for now... anyway, here are a few pics:

[Seleziona]

Thanks!
Your replica actually looks really good! I think you got every part just right! That's some really good work.

[Sharir1701]

Aww... Thanks man, that really means a lot to me.

[Seleziona]

Not a problem :)

[pinderfish]

That is nice you should post it however the mag needs a bit of work, as it is too bulky and not curved enough

[Sharir1701]

i finally got the mag curved using a modded (by me) ironman69's curved mag. it looks exactly like the real gun now.

[pinderfish]

nice

[Sharir1701]

i'm gonna post this gun in a few hours. i've almost finished taking pics of it. about your l86 lsw, i'm trying to invent a new full auto mechanism for it. if i manage to, i will post it soon after i invent the mech. if i don't, i will just try making it a ram gun or a rubber band gun.

[pinderfish]

thanks, and good luck with posting your gun