Instructables
Picture of F5-G2 Kriss
This Kriss doesn't have a handle so it's kinda realistic and loose so if you don't like loose then don't build it.
 
Remove these adsRemove these ads by Signing Up

Step 2: Laser Barrel One

Picture of Laser Barrel One
P1000330.JPG
P1000331.JPG
P1000332.JPG
Start off by (metaphorically) turning the gunshot into a laser.

Step 3: Laser Barrel Two

Picture of Laser Barrel Two
P1000335.JPG
These two cones are to (metaphorically) turn one laser shot of a Kriss into two using the two piece.

Step 4: Connect

Picture of Connect
P1000327.JPG
Connect the pieces as shown below.

Step 5: To Battle!

Congratulations! You have just completed a F5-G2 Kriss! Here's some previews with batman holding it.