Print PDF
Favorite
Email
Step 7CUT THE FEET
Now you should be pretty good with the foam lathe.
The feet can be cut in the same way as the other features. Just cut the max and min diameters first and connect the cuts.
I like to get the overall shape fist, then cut the fine ridges with a very sharp exacto knife.
The feet can be cut in the same way as the other features. Just cut the max and min diameters first and connect the cuts.
I like to get the overall shape fist, then cut the fine ridges with a very sharp exacto knife.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
