Print PDF
Favorite
Email
Step 3Getting everything ready
Time to draw out the whole blade of the brown craft paper. Measure it all out and then draw supports about 10in apart, maybe a little bit less. This is where you will put wood supports on the inside of the sword. One you have all that measured out and drawn then take your wood and cut it out in measures, one for the big long back and various for the supports. Now on the big long piece for the back draw on the point and cut that out with the saw.
[see first picture]
Once you are done with that, sand it down a little bit. Take one of the small pieces and make them to a point from where you want it to slant down into a blade (take a look at the plans if you are doing it to scale). After you draw that on it cut it with the saw and sand it down.
[see second picture]
[see first picture]
Once you are done with that, sand it down a little bit. Take one of the small pieces and make them to a point from where you want it to slant down into a blade (take a look at the plans if you are doing it to scale). After you draw that on it cut it with the saw and sand it down.
[see second picture]
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
