Instructables

FISHING ROD AND UMBRELLA HOLDER

Picture of FISHING ROD AND UMBRELLA HOLDER
IMAG1078.jpg
IMAG1085.jpg
This is the Fishing Rod and Umbrella PVC and Angle Aluminum Bar peace.
 
Remove these adsRemove these ads by Signing Up

Step 1: The size, cut and hole

Picture of The size, cut and hole
1.) Cut the PVC and the Angle Aluminum bar to the same size 2.)  drill a hole like 2inch. from the top 1/4 drill 3.) at the end of the aluminum bar cut a 45* angle  for a sharp stake point

Step 2: Bolt and flynutt

Picture of Bolt and flynutt
IMAG1091-1-1.jpg
IMAG1086-1-1.jpg
IMAG1089-1-1.jpg
3" / 1/4 Bolt and a flynutt should hold it together.

Step 3: The Umbrella and the Fishing Rod how it works

Picture of The Umbrella and the Fishing Rod how it works
IMAG1094-1.jpg
IMAG1095.jpg
IMAG1096-1.jpg
IMAG1098.jpg
IMAG1085.jpg
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!