FMG-9 Mods

PlayKnex by

2,950

9

23

Posted

Introduction: FMG-9 Mods

As some of you may know, I made some mods to TeacherOfTheWays' foldable gun, the FMG-9. I really like the gun and I decided it could use some improvement. Hope you enjoy my instructable.

Step 1: Hopper

The hopper that I attached onto the gun. Is mostly the same as the one from oodalumps' 7-shot pistol. Here are some different views.

Pic 1: First Side
Pic 2: Second Side
Pic 3: top view.
Pic 4: Hopper on Gun

Step 2: Removable Handle

Since I added the hopper I thought it would be easier to reload if I made the handle removable so here it is.

Pic 1: The handle
Pic 2: Different view
Pic 3: Move blue rod to here
Pic 4+5: Add three ball sockets to other blue rod and connect handle

Step 3: Improved Firing Mechanism

I soon found out after making the gun that if you put more than one rubber band on the gun it would not fire because the firing pin would catch on the green connector. To solve this problem I cut a white rod to the size of a green rod and replaced the green rod with that. Sorry but I only have one picture.

Share

Recommendations

  • Sew Warm Contest 2018

    Sew Warm Contest 2018
  • Paper Contest 2018

    Paper Contest 2018
  • Epilog Challenge 9

    Epilog Challenge 9
user

We have a be nice policy.
Please be positive and constructive.

Tips

Questions

24 Comments

Sorry there little dark, I made these pictures like 5 minutes ago xD. 1: The gun (no stock/back yet, As i said xD) 2: The removable magazine. 3: The Gun (magazine removed) It`s folded. 4: End thingy (clip / second smal handle) 5: End thingy clip Folded nto the gun.

090422_163749.jpg090422_163803.jpg090422_163815.jpg090422_163846.jpg090422_163855.jpg

instead of cutting a white rod u couldt also use a bleu thingy with no little rod sticking out. On the green rod that`s what i made when i still had this gun, P.S I making myown FMG-9 and it`s much better then any other i`ve seen here, It has a foldable handle, A removable mag, A HARD FIRING mecha, Smaller then this1. And it`s comfy xD !! Not finished yet but will be soon, (working on the back/stock still)

http://knexinnovation.net/forums/viewtopic.php?f=49&t=722

instructions of FMG-9
btw TeatcherOfTheWays have stolen that gun from Knexinnovation.net