Print PDF
Favorite
Email
Step 2Frame
intro
when constructing the frame it is important to keep ergonomics in mind as you will be holding the device for long periods of time. Also consider the placement of button panels and the accessibility of them.
handle
I constructed my trigger handle out of some F27 hardwood (not the lightest choice of material). I then welded up a frame out of some bits of steel to hold all the parts together. I then cut out another piece of wood for the LED mount in the fount of the gun.
important*
When constructing a device like this it is always important to keep in mind the assembly; otherwise you could end up with screws you can't reach and nuts in thigh corners ect.
when constructing the frame it is important to keep ergonomics in mind as you will be holding the device for long periods of time. Also consider the placement of button panels and the accessibility of them.
handle
I constructed my trigger handle out of some F27 hardwood (not the lightest choice of material). I then welded up a frame out of some bits of steel to hold all the parts together. I then cut out another piece of wood for the LED mount in the fount of the gun.
important*
When constructing a device like this it is always important to keep in mind the assembly; otherwise you could end up with screws you can't reach and nuts in thigh corners ect.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
