Print PDF
Favorite
Email
Step 3Final steps...
Mount the circuit in the project box and run your wires through two small drilled holes. Be sure to tie knots in the wires inside the box to prevent them from pulling out.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
May 18, 2009. 1:21 PMbillgates27
says:
Do the resistors connect to the red wire? What are the red and green wires connecting to? What is the bridge rectifier connected to? (Not the green wire or regulator, that other thing.)
Reply
Jul 12, 2010. 8:12 PMCompgeek789
says:
look at the schematics.
Reply
 |
Add Comment
|
