Step 5: Sheet layer
Now we need to apply a sheet of the TP, over the entire area.
First we need to paint a thin layer of glue to help it stick.
Lay it over and press it down into all the gaps, chances are it we tear, don't worry.
Once it is on there take some more glue and saturate it, untill the TP almost goes see through.
Make sure the glue soaks back down to the skin.
Dry the area well.
First we need to paint a thin layer of glue to help it stick.
Lay it over and press it down into all the gaps, chances are it we tear, don't worry.
Once it is on there take some more glue and saturate it, untill the TP almost goes see through.
Make sure the glue soaks back down to the skin.
Dry the area well.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
