Instructables

Fabulous Ironing Board Cover

Featured
Picture of Fabulous Ironing Board Cover
Make the menial task of ironing something spectacular!!

Cover that cold metal ironing board with something cheerful and lively!!

MATERIALS:
1 3/4 Yards Cotton or Linen 45" or 60"
1 3/4 Yards Non Fusible Fleece
4 Yards Extra Wide Double Fold Bias Tape
4 Yards 3/8" Elastic
2 Buttons

PLEASE NOTE: that all measurements are based on a standard - full size ironing board.

This instructable can easily be altered to fit any ironing board by adjusting the yardage. All steps remain the same.

Recommendations:
It is best to use one piece of fabric that has not been pieced together. Natural fibers such as cotton and linen work best.

Please do not use synthetic fibers as your top surface as they could melt while ironing.

Please read through all instructions prior to beginning this project.

For purchase - please visit my etsy page at
http://www.bleuview.etsy.com
 
Remove these adsRemove these ads by Signing Up

Step 1: Creating Pattern

Picture of Creating Pattern
With the ironing board open, turn upside down and lay on back side of fabric.

Step 2: Mark Fabric

Picture of Mark Fabric
Using a writing utensil that will show on your chosen fabric, make a dashed line 2.5" (6.35 cm) around the perimeter of the of the ironing board.

When complete, draw a line connecting the dots - this is your cutting line.

Step 3: Cut Fabric

Cut along line.

Lay cut out fabric on top of fleece. Using fabric as a template, cut out fleece to same size.


Step 4: Baste Stitch

Picture of Baste Stitch
Baste stitch fleece to back side of fabric.

Step 5: Mark Middle

Picture of Mark Middle
Fold ironing board cover in half.

Mark middle of the wide side of the board with a pin.

Step 6: Bias Tape

Picture of Bias Tape
Piece together bia tape (if needed).

Unfold bias tape and stitch ends together.
abilmom1 year ago
great instructible! I just made my own cover with a little help from you. my favorite part=the buttons on the ends of the elastic, brilliant!

My cover is a little different, however. I didn't need the fleece lining, my ironing board has a padding my granny had put on it. Also I didn't have bias tape, so I cut the fabric extra big, then folded the fabric over 2x and stitched to make a self casing for the elastic. oh, and I did a gathering stitch just around the pointy end before sewing the casing. (it was like making a really big puffy sleeve!)
Before measuring and cutting I got my fabric wet and machine dried it, soo glad I did, it shrunk a lot. I used "duck cloth" which comes in such cute prints now.
Hmm, I went stupid and messed up adding the photo!
Thanks! That was very easy to follow!

I had bought a cheap mini ironing board for my sewing room, and while it's fine formy needs, it was covered with this cheap, thin muslin that was starting to fray when I  took it out of the box. And it was just stapled on, so there was no way to take it off to clean it.

I found the fabric for $1 at the Goodwill, and I think it's a huge improvment.

carolee19452 years ago
I was so frustrated!!! My ironing board cover was all goofed up because I put a hot iron on stuff that melted. I needed a new cover, but none of the standard ones you can buy on Amazon fit!!! I am going to get going on this right now!!! Thank you for such clear directions.
Mupton1012 years ago
This is great I can't wait to get started. Your instruction are so easy and I like the material you used. You can really see everything very clearly.
Thank you.
M from Wyoming
madzac2 years ago
When I have made an ironing board in the past , I have used bias fabric for the feature material to get e really snug fit. The only downside of doing this is that it takes more material. it is well worth it
madzac
bleuview (author)  madzac2 years ago
Yes, that is a good idea to use the fabric on the bias. I have also made these on the bias in the past. Depending on the print or the amount of fabric I have, I do not do this. I have found that using good quality, heavier fabric in conjunction with the electic gives it a nice snug fit too.
madzac2 years ago
I have made ironing board covers in the past and found it a good idea to use the top fabric on the bias to give a very good fit.
dlwilcox3 years ago
i made this for my dad for fathers day, he LOVES it! his old cover was literally taped to the board to make it fit. very unsightly :( that thing was 20+ years old. thank you for the inspiration!
bleuview (author)  dlwilcox3 years ago
So glad it your Dad loves it! Now he can do your ironing too!
sunshiine3 years ago
This is totally awesome! Thanks for sharing your hard work!
bleuview (author)  sunshiine3 years ago
Thank you!
b1russell4 years ago
Finally! One that FITS!!!  Thank you, thank you.

By the way, a tip for cheapskate - I mean frugal - ironers/sew-ers:  I was looking for a press cloth (read the instructions for iron-on interfacing after all these years!) and used one of my mom's linen dish towels - it started its life as a calendar.  Instead of using the faucet and wringing out the water, I just put the towel where I needed to press and sprayed with the cat deterrent bottle.  Worked like a charm!
I have been searching the internet for instructions on how to make an ironing board cover, and although I have come across quite a few this is 'the' best one I have seen and will definitely definitely definitely be using these instructions to make mine. Although I might add Insul Bright to my one as an additional form of padding as my ironing board is metal mesh. Thanks again for such great, easy to read and understand instructions. From an ADDer.
Awesome--I've been needing to make a new cover. Nice instructable!
Very useful and easy to follow, thank you!
The link to your Etsy page isn't working. Are you still selling these?
bleuview (author)  FrugalSewing6 years ago
Opps! Sorry for the bad link - I have corrected it. I currently have 2 styles for sale. Thanks for asking.
jessiep7 years ago
If you'd like your project included in the Sew Useful Contest, be sure to add a link to your its Etsy page.
nikkishell7 years ago
This is perfect, just what i need as my ironing board cover is looking very poor at the moment. I'm going to give this a go. Thanks :)
SugarTeen527 years ago
Wow, this is done really professionally.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!