Instructables

Familie Binder - lounger by Clemens Bauder & Klaus Scheibl

Picture of Familie Binder - lounger by Clemens Bauder & Klaus Scheibl
Familie Binder is a small family of furniture consisting of the stool 44/17, the chair 44/21 and the lounger 46/16. The seats are conceptualized for home assembly.
Once cut, polished and drilled, the wooden parts are simply put together using a cable tie.
Familie Binder was designed by Upper Austrian designers Clemens Bauder, Margit Greinocker, Michael Holzer, Magdalena Reiter, Klaus Michael Scheibl and Katja Seifert.
The furniture is designed according to open design guidelines. Therefore, the conceptual designs are publicly accessible and can be copied and further developed.
Familie Binder is happy to keep growing. If you design new offspring, please send us photos for addition to the family album to office@creativeregion.org.

a project by CREATIVE REGION Linz & Upper Austria
photos by Helga Traxler
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials

Step 2: Joints

Picture of Joints

Step 3: Cutting plan

Picture of Cutting plan
Screen Shot 2013-02-20 at 1.40.45 PM.jpg

Step 4: Drilling plan

Picture of Drilling plan
Screen Shot 2013-02-20 at 1.41.18 PM.jpg

Step 5: Assembly instructions

Picture of Assembly instructions
Screen Shot 2013-02-20 at 1.59.32 PM.jpg
Screen Shot 2013-02-20 at 1.59.46 PM.jpg
Screen Shot 2013-02-20 at 1.59.55 PM.jpg

Step 6:

Picture of
You can download a manual for all three furniture pieces here.
ZaneEricB1 year ago
Very nice...would like to have seen it with reclaimed wood...but i am sure the instructibles community will figue that one out!....Yall get to it! Ill do the same.
This project series is pretty cool. Thank you for sharing.