Introduction: Farm Style Wine Rack

Picture of Farm Style Wine Rack

First let me start off by saying this wasn’t going to be an instructable, but I decided to do it after I built it. I am sorry about the pictures. Well here we go.

Step 1: Tools Needed

Picture of Tools Needed

Miter saw, table saw, pencil, tape measure, and drill

Step 2: Materials Needed

Picture of Materials Needed

Stain, 1 1/4 in trim screws, pallet wood, 1x4, rake head,

Step 3: Cutting Your Wood

Picture of Cutting Your Wood

I made my wine rack at 29inX19 1/2in. So cut you 1x4s. 2 at 18 inches, 2 at 29in, and 1 at 19 1/2in. Then cut your pallet strips at 29 inches.

Step 4: Stain Your Wood

I used honey stain, I liked the color so I went with one coat. If you want to go darker wait until it dries and add another coat

Step 5: Build Your Box

Picture of Build Your Box

Take your 1x4s, grab one 18 and one 29 screw the 29 into the 18. Then do the same on the other side and build a box, or rectangle if you want to get specific. Then take your 19 1/2in board measure up 2in from the bottom and attach it. Then take your pallet wood and attach them on the back.

Step 6: Attach the Rake

Picture of Attach the Rake

Find the middle of the box at the top and screw in the rake

Step 7: Adding the Wine and Glasses

Picture of Adding the Wine and Glasses

Once that is finished add your wine and glasses and impress your friends. I made this for a friend that lives in an apartment. She can’t hang it on her wall so it will go underneath her microwave. If you want yours to hang on a wall I recommend 2 hangers not one in each of the top corners

Step 8: Sorry

Like I said I didn’t plan on making this an instructable, so I am sorry for the pictures. Thank you for looking though.

Comments

dekeros (author)2017-12-26

Great design, and good use of that rake! :-)

About This Instructable

466views

15favorites

License:

More by jay.bengal14:Farm Style Wine RackPour Over StationMagnetic Bottle Opener
Add instructable to: