Introduction: Fat Head
So i wanted to make a fat head of a WVU football player Kevin White. College game day is coming to Morgantown this weekend and i decided to make a fat head to bring to the game. Please feel free to comment any questions.
Printer paper and a lot of ink
Step 1: Decide on an Image
First pic the image that you want to blow up. Pick a high quality photo to make sure that it is not to fuzy. Also be creative. Have fun with it. I picked this picture of Kevin White
Step 2: Open It in a Word Document
Open your picture up and insert a graph over top of your photo. Make each of the cells 1inch by 1.3 inches. This would make one page for each cell. Make the grid as big as you want your poster to be. In my case i used 20 squares because i wanted it to be very big
Step 3: Crop the Photo
First hit Print Screen and the copy it back into the word doc. Then crop it down to one of your cells. Then enlarge it to your desired size. I usually try to make the width 7 inches and i keep that consistant to maintain the same dimensions. The print that page and repeat the process for every cell until all cells are printed.
Step 4: Lay Out Your Photos
Lay out your photos to make sure it looks the way you want. I had mis printed one of my pages, but i was able to fix it easily because of this step
Step 5: Cut All Edges and Glue
Everything seemed to be in line at this point so i continued on to gluing it to the poster board. I was very careful in doing this to avoid air bubles. Then i layed books on top to make it dry better
Step 6: Finally Cut Out Your Board
Cut on all pf the edges of your picture and touch up any mistakes you may have made and just like that you have a fat head!
We have a be nice policy.
Please be positive and constructive.