The inspiration for this dress followed the first time I saw this fiberoptic product in action. I was at a festival when I saw a bloom of fiber optic jellyfish approach, and they created such a beautiful effect that I knew I had to turn the concept into something wearable. I'd been wanting to incorporate fiber optics into fashion for a while, but this made it clear what I wanted to use and how.

The fiber optics are from Ants on a Melon, and the awesome photos were taken by audreyobsura. Many thanks to both of you for all the help along the way!

Passo 1: The Design

The design of the dress followed the fiber optics that it needed to support. As there is one central light source, I designed the back to include a pouch for the handle, and the straps of the dress to bring the fiber optics from the center back to the front, and back around the body to an even distribution at the hips.

A big design challenge was how to give the filaments enough lift at the skirt, as I wanted the skirt to push them out at as near to a 90 degree angle as possible. I was considering things like a fully boned structure or 3D printing small pieces for each group of filaments to angle them out at a perfect right angle. However in the end I just went low tech and stuffed the skirt with tutus :) I'd still like to explore these other two options eventually.

Be warned that this Instructable includes a major fail at one point, so read the whole thing first if you intend to make this. I ended up designing the dress and fiber optic design in different parts of my mind, and put the zipper on the side not thinking about the fact that once the fiber optics were sewn down, I couldn't open it! What I was thinking, I have no idea (I wasn't). But as recovering from major errors is an integral part of making, I included this saga in the Instructable.

I chose to make this dress from scratch to dust off my fashion skills, but you could definitely make something very similar by buying a V-neck dress with a circle skirt and skipping to step 13.

<p>What sort of fiber optics did you use and where did you get them from? (Please &lt;3)</p>
<p>I think what you've created is absolutely awesome!!!</p>
<p>Thank you so much for making this Instructable! Your descriptions and photos are spot-on and helped me get over my fear of making my first dress - from scratch! I can't wait to add fiber optics and awesome lights. I don't have a fiber optic flashlight, so I was going to make a DIY version. I was wondering, if you were making another dress, would you use the same number of strands again, or more or fewer?</p>
<p>Horray for making your first dress from scratch! As for strands, I am quite happy with how many there were (360). Any more and they would have barely fit over my shoulders in any elegant fashion. Fewer would have looked thin by the bottom. Take care with choosing the thickness of the fibers. The product I used has a great weight, it is thick enough that it has some body to it and isn't very fragile, but isn't so thick that it is difficult to work with. Good luck, and I'd love to see what you come up with!</p>
<p>Using 360 strands worked just perfectly! Also, I have a newfound respect for your patience now after sewing on ALL those fibers. I can't express enough gratitude for your Instructable's guidance (especially detailed photos like where to place the pins and stitches to hold the fibers for sewing).</p><p>After all that work, the end results are totally worth it. I couldn't be happier with how my dress turned out. In my DIY lighting version, I ended up using NeoPixels to illuminate the fibers, with two laser-cut acrylic holders securing all the bundles. I have an Adafruit Gemma controlling the LEDs so I can program different lighting patterns, and a 12V battery powering it all. The skirt makes a perfect hiding spot for the electronics.</p><p>I'm totally excited to wear mine at Burning Man next week! Will you be there with yours?</p>
<p>Hi, I was wondering if you could tell me a bit more about how you attached the filaments to the neopixels--maybe a drawing of these acrylic holders you made? I am looking to go the same route (w/ the flora or gemma) but don't know how I'm going to attach the filaments to the flat neopixel. Usually I'd use an ultra bright LED bulb and clear tubing, obvs. that won't work with the neopixel.</p><p>Looks great BTW! Haven't used neopixel yet and was concerned it wouldn't be bright enough. Your photos but my mind at ease there!</p>
<p>Where did you get the fiber? Any tips on attaching them? Thanks!</p>
<p>Hi Marie! I bought these fibers from Ebay (<a href="" rel="nofollow"></a>). I needed 2 sets, 200 strands each, 0.75mm diameter. Starting at the back of the dress, the fibers are in bundles of 20 each, and then they're divided into bundles of 10 starting at the shoulders. I made each group of 20 fibers by placing the strands side-by-side on the sticky side of a piece of packing tape, then rolling it up tightly. Then I trimmed the ends so they're all even. The LEDs and fibers are held in place using a laser-cut acrylic adapter that I designed (I'm happy to share the Illustrator files for it). Finally, to sew all the fibers to the dress, I followed Natalie's excellent instructions. Best of luck, and have fun!</p>
<p>That turned out so awesome!! I'm new to electronics, but using neopixels is the next thing I wanted to try, but was struggling with how to attach the fibers to the strip. Thanks for sharing photos of the back, I'm excited to explore this method! I may pick your brain more when I get to the next iteration :) </p><p>I'm taking this year off of burning man, but you can rock the dress in my stead! Have a great time!</p>
<p>So I bought the 360 fiberoptic whip from Ants on a Melon, and found a turquoise/aqua blue A-line dress from Macy's. It doesn't have a v-neck, and the zipper goes up the back. I'm making the dress for the Mad Scientists Ball at Sci-Port: Louisiana's Science Center, where I will be working the ball, serving drinks. The theme is Monsters, Myths, and Legends, and my area (Science Corner) is the Mythological Creatures section. I'm not sure what mythological creature I'll be, LOL, but I got a tiara, fishnet aqua fingerless gloves, and white go-go boots from ellieshoes. Oh and a tiara. I think I'll go as &quot;Princess Awesome&quot;. </p><p>Anyway, we have several 3D printers. I'm just wondering how I could integrate 3D printed object to help form the dress. Maybe give it some lift at the skirt, but what would I make and how would I hold it down? Also, the back is fairly high, and scooped, like the front. Not sure where exactly I'd put the handle. I love the garter belt idea for holding things down, but if I put the handle there, it would be weird because that's where the bundle of lights starts. The dress has 23 or so inch-wide strips, like flat pleats, where I intend to sew down the fibers.</p><p>Any suggestions are welcome!</p>
<p>Generally I would still recommend putting the handle in the center back, as it has to be along the zipper or below it for you to get in and out of the dress. I wouldn't recommend a garter, because the motion of walking would pull and push the fibers out of place. I'm not sure how wide the a-line is, but you could potentially put the handle under the dress as part of a tutu/petticoat underlayer, space permitting. </p><p>As for 3d printing, one of the things I thought about was making essentially elbow macaroni with sew holes for the fiber bundles to pass through at the waist, in order to direct them outwards without weighing down the skirt. There are a lot of things you could experiment with in terms of form, since the shape formed by the fibers and the shape of the dress don't necessarily need to match.</p><p>Be sure to post photos when you are done - I'd love to see it!</p>
<p>Ok so I got the lights and the dress but the dress does not have a zipper but it criss crosses with a ribbon in the back. I am having difficulty in figuring out how to put on and take off the dress once the fiber optic is sewn on? It needs to expand in order for my daughter to get out of the dress. Please help..</p>
<p>Anywhere the fiber optics are sewn to will not be expandable, so I'd either make a pocket for it that hangs over the criss cross, or figure out a place to embed it under the skirt and make a hole for the fibers to pass through to the back of the dress.</p>
<p>Thank you for the incredible inspiration! My version was made as a wedding dress for a wedding on the playa this year. The Bride saw your dress and wanted something similar. I used the double ended version of the whip to embellish an existing dress (to which I also added a shoulder piece). The whip is hidden in under the flowers of the skirt at the back. The light of the strands diffused really nicely through these organza flowers, giving the whole skirt a glow. I eventually ended up wiring my whip to a larger Lithium ion battery by drilling a hole in the bottom of the whip and running wire out from the existing battery connector. Photos by</p>
Thank you so much for this!! I followed your instructions and the dresses turned out amazing! Your dress idea was so incredible, I can sew, but chose to just find dresses that would work. I really like working with this better than the el wires
<p>These turned out great! Thanks so much for posting these photos! </p>
<p>OMG This is beautiful!! I would like this for my daughter's Sweet 16's perfect for her glow in the dark theme!! Plus her dress is like Cinderella (Quinceanera style) and the fibers dangling will lay nicely...Love Love Love this!! and I know she would too. Unfortunately, I don't sew, I make beaded jewelry lol. Nowadays, it's hard finding a seamstress in my area :(((( So sad. I'm open for any suggestions, if u have any. Her party is until March 2015. Please help. Below are 2 dresses she had picked out but would be amazing right??</p>
<p>You can always buy the fiberoptics and hand sew them to your dress of choice, no real sewing experience required, just a lot of patience :) It wouldn't have the same silhouette, but in the dark you would get a similar effect.</p>
<p>Yeah true but I don't wanna mess it up lol. I was thinking having the fiber optic along the edges of the bust line all around and that v shape around the waist (of purple dress) and let the rest of the lighting dangle like your dress. Would that look okay?? Dress will be white of course.</p>
<p>I'm sure whatever you do will turn out great, and no need for a white dress necessarily! </p>
Hello,<br>I don't know if this will help but I make wedding dresses. I am not able to see the pictures of the dresses your daughter has picked out but please reach out to me on Facebook under John Roberts Bridal. We may be able to help you out. :-)<br>Thank you,<br>Johnathan P.<br>John Roberts Bridal
<p>contact your local fabric store. They can give you names of seamstresses. There may even be one that works there.</p>
<p>Beautiful! I'll remember for when my daughter is younger.</p>
<p>This is so amazing. I do not sew. When I saw this I said to myself, what a gifted person. I read down through your story and was very impressed. You have blessed hands and to share this with others so they can create their own is wonderful. I keep replaying the video because it is magical. Keep up your fabulous work. Wish I could sew, if I could I would make something like this for my great nieces when they turn 5 so they could look like angels.</p>
<p>Is a white dress a must? Would it work on a black dress?</p>
<p>I think it would work fine on any color dress. I chose white because it is more visible at night, and provides a good backdrop for the light coming from the fiberoptics.</p>
<p>Awesome! I had the same idea about a year ago for a fiber optic jellyfish dress. I made sketches and everything, I just didn't have the time/money to invest in it yet. Seeing this dress in action is really inspiring, I can't wait to make my own! ^_^</p>
<p>HEllo! BEautiful. What type of stitch did you use to sew the fiber optic filaments down? Thank you :-)</p>
<p>Nothing too fancy, just a whip stitch I think (I don't know my hand sewing stitches well). I tried to pass the thread through the backside in between stitches to keep the visible thread to a minimum, then just did a loop around the fibers to tack them down. My stitches were about an inch apart.</p>
<p>Thank you so much for this tutorial!! I absolutely loved the process of making this beautiful dress and am wearing it to my university's Science Ball which is themed 'Bright Lights'. I love how it turned out and all my family and friends are very impressed. </p>
<p>That's fantastic! I'm so glad you made one and love it. Have an awesome time showing it off at the Science Ball :)</p>
<p>Wauw, this is what future clothing looks like. So nice that you are willing to share this amazing concept. Thanks!</p>
<p>Hi Natalina! Beautiful dress! When you were sewing the fibre optics to the dress how often did you stitch them down? Did you have a continual running stitch down the length of the fibre optic or did you tie each stitch off?</p>
<p>I had a combination of both. I started with a line of stitching at the top and front shoulder a few inches apart that held all the fibers down, and once they started to separate I used a continual running stitch from the front shoulder to the waist on each bundle of fibers. I think things would have still looked good if I only stitched them down every few inches, but I wanted to keep the inside clean. </p>
<p>Awesome! Thank you Natalina! </p>
<p>This tutorial is amazing and I'm currently in the process of making this dress for a costume party. I did want to ask though how important the boning is to the garment because this is the step I appear to have glossed over. The bodice is double layered and form fitted so I'm hoping it will still be ok but definitely wanted to reach out for your opinion and what the boning did for your garment once completed. </p><p>Thanks again for making this tutorial! So helpful.</p>
<p>I don't think the boning is a must, but I preferred it for this application as it gave some additional structure so the fibers could be sewn down to something that was more static in shape. Without it the fabric will bunch and move more while it's on, which can make the fibers pull and push out of their channel more. As it is, I still need to tug the fibers back down periodically, as depending on how I'm moving certain areas of fibers will want to move upwards and will stick up a little at the shoulder. Hope that makes sense, it's a somewhat difficult phenomena to explain. </p><p>I'm excited you are making the dress! Be sure to post some photos when you are finished, I look forward to seeing the finished product!</p>
<p>This is wonderful idea.The fiber optic system is very fantastic and useful, if you want to meet the eye.Congralutions :)</p>
Hi, i love the dress and I was thinking about making a dress like this for prom (I'll have to figure something different out with the battery issue) but I was wondering if you knew how I could make a fiber optic tie for my date or where I could find something along those same lines? Thanks :)
<p>A few ideas would be an led tie like <a href="" target="_blank">this instructable</a>, or you could just get a <a href="" target="_blank">glowby</a> and sew the strands down to a tie for a super cheap and easy touch of fiberoptics. Good luck!</p>
<p>also, are the fibers comfortable to wear? The kidlets won't tolerate them if they are pokey.<br></p>
<p>The fibers aren't pokey. If you attached the fibers to a comfortable garment to start with, it would be fine.</p>
Thank you for the replies. You rock! :)
<p>Stunning! How durable are the fibers? I'm kind of fed up with making my kids awesome light-up Halloween costumes only to have them destroyed in one day. Usually by kinking the el wire/led strands/wires when sitting at school on costume day. Can you sit in it without breaking the fibers?</p>
<p>Pretty durable, I've stepped on the fibers going up the stairs which yanks them really hard and only one has come lose so far, and none have kinked or broken from sitting. That said nothing is indestructible, and I wear it with care as I don't want to damage it.</p>
This is the most stunning article of clothing I've ever seen. I know this is a place to help people make their own things, but is there any way you'd consider making another to sell based on someone's measurements?
<p>This is awesome ! Thank you for this great 'ible :)</p>
<p>Natalia,</p><p>This is wonderful and beautiful!</p><p>A couple thoughts crossed my mind as I read through the 'ible and the comments:</p><p>* Regarding the battery problem, have you looked into converting the kinetic energy from body movement into electrical energy to recharge the battery? My old brain remembers reading somewhere it was possible...</p><p>* How 'bout integrating a Raspberry Pi or Arduino into the mix so the fiber optics could be programmed to respond to music like the light-up electronic t-shirts do? You could have certain colors correspond to certain frequencies, have the color changes follow the tempo of the music, etc...</p><p>This has got me thinking about making a vest of some-sort, possibly out of silver lame to heighten the reflectivity of the optics... hmmmm....</p><p>Awesome job!</p>
<p>that dress is beautiful! </p>

Sobre este Instructable

206.067 visualizações

1.221 favoritos

Postado em:
Abr 2, 2014


Bio: I'm a designer at Instructables. I have a degree in fashion design and like to sew, get crafty, and attempt to use power tools.
Mais por Natalina: Laser Cut Leather Flask Party Bike Whiteboard Costume
Add instructable to: