Introduction: Fidget Spinner From Items in the Garage

Picture of Fidget Spinner From Items in the Garage

Are you the type of person who clicks their pens or taps their pencils on desks... Well if you are then this instructable is for you! In this instructable I'm going to show you how to make a 2 arm fidget spinner from items that you can find in your garage or at almost any hardware store.

Step 1: What You'll Need

Picture of What You'll Need

One bearing (ceramic or steel)

two small elastics

One big elastic

Hot glue gun

two pipe clamps

two pinch close hose clamps

Step 2: Making the Base

Picture of Making the Base

Step One.

Glue the hose clamp's to each side of the bearing.( put on a fair bit so the glue oozes out the sides, that helps it hold together better)

Step 3: Making It More Durable.

Picture of Making It More Durable.

Step 2

Take the large elastic and wrap it around the clamps and bearing.

Now take the small elastics and wrap them around where the clamps meet the bearing.

Step 4: Finishing

Picture of Finishing

Start fidgeting!

Comments

About This Instructable

5,111views

16favorites

License:

More by 7macs:Sprinkler Head GeocacheFidget spinner from items in the garage Smoke in a Jar
Add instructable to: