Introduction: Fidget Spinner
This is a laser cut spinner with two layers of acrylic and one layer of wood.
Step 1: Step 1 Customize a Spinner on Inventor
Customize a spinner how ever you would like the diameter of the open circle should be 22mm.
Step 2: Step Two Create a Drawing File
Create a drawing file of your spinner that just shows the top face.
Step 3: Step 3 Set Up Your Laser Cutter and Lazier Cut
Laser cut 2 acrylic spinners and 1 wood spinner.
Step 4: Step 4 Glue the Pieces and Put in the Bearing
Glue all of the three spinners together. After the glue has dried slide in your bearing.