File Bow

This is a bow You can make out of the metal strips in hanging files.

Step 1: Stuff You Will Need.

You will need a few simple things:
3'-4' of Nylon string,
1-2 files to got the bow staff from,
(Optional) Lighter to burn off fuzz and finish it.

Step 2: Bow Staff

Take the piece of metal and bend it a little bit.

Step 3: Stringing the Bow.

Tie the string th one end in the notch then wrap 10-12 times and tie again.
repeat with other side.

Step 4: (Optional) Burning the Fuzz.

Take the lighter and burn off any fuzz from the ends where you tied it (be careful not to melt the actual string!).

Step 5: Arrows.

When you are finished you can use wooden skewers for arrows.
If you can think of anything else you can use for arrows, or any improvements please comment.