With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A file cabinet is a great organization tool and a necessity for most people, but let's face it. It's a big eyesore! Some people buy their file cabinet...
Add about 3/4 of an inch to each side, and then cut four pieces of contact paper that size. (FYI: I didn't need to take the drawers out to apply the c...
This actually took more time than I thought. If I would have taken the drawers out, I bet it would have been an easier and quicker process.
Peel away part of the backing and start at the top of the drawer. Simultaneously, press the plastic card against the cabinet and push downward inch by...
I wasn't able to remove the little silver latch thing that is used to open and close the drawer, so I had to use the X-Acto knife to cut a hole around...
Then, replace the hardware.
You can relax; the hard part is over. Now, repeat the process of applying the contact paper to the rest of the sides of the file cabinet. Remember to ...
But first, here is a before picture (except that I had already covered one drawer):
That's all there is to it! Happy filing!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »