Print PDF
Favorite
Email
Step 6Battery
The two end of the wire that we bended (picture 1) connect to the battery.
Connect them to the battery whit the electrical tape (picture 2) and your circuit is done!(picture 3)
Test it by pushing the switch, if all is good the LEDs should lite up.
Connect them to the battery whit the electrical tape (picture 2) and your circuit is done!(picture 3)
Test it by pushing the switch, if all is good the LEDs should lite up.
| « Previous Step | Download PDFView All Steps | Next Step » |
4
comments
|
Add Comment
|
Jun 26, 2008. 9:02 PMryboodle
says:
thanks I had a great time making it
Reply
5
Jun 27, 2008. 5:42 AMcomodore (author)
says:
thank you! Upload some pictures so every one can see your creation!!!
Reply
5
Apr 25, 2008. 1:08 PMcomodore (author)
says:
Thank you!
Reply
2
Apr 25, 2008. 6:57 AMSpinWard
says:
This is a wonderful great picture. For some reason the idea of LED's confuses me but this instructable is easy, well explained and simple. Thank you! I'll actually make this to try out LEDs
Reply
 |
Add Comment
|
